Swivel Chair Replacement Parts

Gliders and Rockers

Swivel gliders
Replacement, create, construct or adapt

To install style #18650 swivel and glider, there must be a minimum of 6" space for the glider (under) inside the chair bottom. Chair sides can be up to 34" in width.
The installer must provide 2 pieces of 3/4" thick by 3 1/2" wide hardwood installed securely front to back to attach the 2 glider flat steel plates.
All installations require a skill level of 8 on a scale of 10. 1 being easiest
View a factory installation drawing. Also see Glider Installation tips for more information.

swivel and glider with ring image
  • Swivel Glider rocker 250 lb. users weight
  • All steel with strong linkage
  • Painted Black
  • Glider rocking motion
  • Floor glides permanently attached
  • Overall sides height with ring-6 5/8"
  • Overall Glider width-14"

Swivel Glider not intended for large heavy chairs

Swivel and glide rocker options
  • Glider, 42 BB swivel (no ring) Style #18500...$157.70 Now $78.85
  • Glider includes heavy duty swivel, 24" steel ring and attachment hardware. Style #18650...$226.75 Now $113.97
    See Glider Installation for Glider install tips

chair glider image
  • Overall height at sides, 7 1/2"
  • Height at side mountings 6"
  • Floor glides permanently attached
  • 250 lb. usees weight load
  • Overall width at linkage 21 7/32"

Unique parallel rocking motion similar to porch glider

Chair/Ottoman Glider Style #18700...$194.60 Add To Cart Now $97.30

See Glider Installation tips



Style #18219S with 24" ring will acomodate 19"+
wide inside chair frame sides $235.10 Add To Cart

Style #18223S with 24" ring for 23"+chair frame sides
23" wide...$241.35 Add To Cart

Style #18226S with 24" ring for 25 1/2"+ chair frame sides
25.5" wide...$255.30 Add To Cart

Installation is accomplished by attaching a 1"x hardwood (Hard Maple or Oak is recommended) to each steel flat rail and then attaching the rail with 1"x to the chair.

An alternative installation method is to first install 2 pieces of 3/4" thick wood from front to back inside the chair. Then lay the unit down onto the installed wood and install screws.

Gross weight 30 lbs. Ships UPS or USPS-1 per carton

GLIDER AND SWIVEL FEATURES


  • Permanently lubricated glider bushings

  • 24" diameter x 3/4" thick ring

  • Installed non-marking floor protectors

  • 10 1/4" square swivel plates 500 lb load

  • 15/16" thick ball bearing swivel

  • No plastic race (to break)

  • Max glider users weight 350 lbs.

  • 65 steel ball bearings

  • Pre lubricated bearings

  • Fully assembled unit

  • Mount to chair screws included
HEAVY DUTY

Swivel Glider

Enlarge
This heavy duty swivel glider is available in widths for up to 1 1/2"+ wide upholstered chairs
Enlarge
HEAVY DUTY
Chair Glider
This heavy duty chair glider is for
25 1/2"+ wide framed upholstered chairs.

Style #13326 chair glider...$184.95 Add To Cart
Enlarge
HEAVY DUTY
CHAIR ROCKER
for up to 20" wide chair frames
for up to 20" frames use Style #11120...$79.95 Add To Cart

for up to 21" frames use Style #11121...$81.95 Add To Cart

for up to 23" frames use Style #11123...$85.95 Add To Cart

Non-marking floor glide tips
Noiseless rocking construction
Up to 350lb user weight