Tilted swivel Bar stool and chair Swivel repair parts

are used with a back (...but not always. Help!)

view our Flat Swivels for Bar stool and Chairs

Measure mounting holes from edge of one slot to edge of the other slot as in white arrow. Or instead, figure the centers of each.

Unless stated otherwise, 5 1/4" mounting hole patterns are 5 3/4" maximum; 5" minimum

Tilted Bar stool swivel, Kitchen and Dinette chair Swivels
ARE OFTEN STATED AS 7" SQUARE

Has 4 threaded 1/4" bolt holes on 2 1/2" centers which attach to chairs steel pedestal plate

6 3/4" square plate

• 3° Tilt
• Pre lubed & made in USA
• Heavy 12 gauge steel
• 12 Steel Ball bearings (Style #150T)
• 51 Steel Ball Bearings (Style #153T)500 lb load
• Commercial duty
• 5 1/4" mounting centers (holes 3/4" slotted)
• Uses Style #901B swivel bolts shown below

SWIVEL BOLTS Specially for Style #150T and #153T above. Serrated flange Hex head type does not loosen nor pull through slots. 1/4" x 20 threads, 1/2" long. Style #901B... 0.41 each Quantity

Heavy large oval headed Phillips screws prevent common pull through mounting problems. Style #6090S...$0.17 each Quantity

Tilted Bar stool Swivel & swivel chair Style #152T...$13.90

6 3/4" X 6 3/4" plate

• Nylon race
• 3° Tilt
• Pre lubed & made in USA
• 12 gauge steel
• 6 Steel Ball bearings
• 5 1/4" on center ± slot (holes 7/8" slotted)
  
  

6 3/4" X 6 3/4" plate

• 51 Steel Ball bearings
• Heavy 12 gauge steel
• Pre lubed & made in USA
• 3° Tilt
• 5 1/4" center holing ± (holes 3/4" slotted)
• Commercial duty 500 lb. load

Tilted barstool swivel and chair swivel Commercial Duty with "Memory Return"
Style #149T...$28.90 each

• 3° Tilt
• Bolts to steel seat plate on 2 1/2" centers
• Positive 90 degree stop
• Lock nuts (4) included
• Pre lubed & made in USA
• 5 1/4" X 5 1/4" on center
• Overall Width 6 7/8" Overall length 7 13/16"
• 12 Steel Ball Bearings
  • Bar Stools
  • Ice cream stools
  • Restaurant counters
  • Beauty shop chairs and stools
  • Pool and Patio
  • Counter stools

    ---

Tilted bar stool chair Swivel with "Memory Return" Style #156T...$18.99

Top plate 7 3/4" square. 6 9/16" on center holing
Bottom plate 7 31/32" square. 5 21/32" on center holing

• 17 steel Ball Bearings
• Nylon race
• 12 gauge steel
• 3° Tilt
• Pre lubed & made in USA
• Returns to normal position automatically

, 5 1/4" on centers hole pattern with 7/8" slots

• 12 large steel Ball Bearings for style #162T
• 51 large steel Ball Bearings for style #167T
• 90 degree positive stop either direction
• Pre lubed & made in USA
• Nylon race on #162T only.
• 12 gauge steel
• 3° Tilt
• 1" thick

Commercial duty

Tilted Patio and Outdoor Zinc plated 6 3/4" square swivel

Style #132TZ...$31.90

• 13/16" thick
• Pre lubed and made in USA
• 12 gauge steel
• 3° Tilt
• 5 1/2" screw mounting
• 3/4" hole slots
• Non-corrosive Nylon bearing
• No-Corrode Zinc plates

Tilted Memory return barstool chair swivel with 90° left and right has hole in each corner to attach wood legs
Style #164T...$27.60

Top plate hole centers 5 1/4", & 3/4" slots, 7" square
Bottom plate 8 1/4" square and 6 1/4" hole centers

• 12 gauge steel
• 3° Tilt
• 12 steel Ball bearings
• Pre lubed & made in USA
• Positive 90° stops either direction
  

  ---

Tilted Bar stool chair swivel has hole in each corner to attach wood legs
Style #157T...$21.85

Top plate holes 5 1/4" & 3/4" slots, 7" square

• Bottom plate 8 1/4" square
• 6 3/8" hole centers
• 12 gauge steel
• 3° Tilt
• 12 steel Ball bearings
• Pre lubed & made in USA