Swivel Chair Replacement Parts
Columns for manual posts
*61C (45mm) may be used when replacing Kitchen Chair bases or Ottoman bases to obtain correct standard desk, table or leg height. The inside diameter hole fit's new and older stationary or tilter mechanism 1" spindles.
61A and 61B (45mm) fit our Plycraft lounge chair bases.
61A is 1" shorter than 61B and is like the original height. Both require a 1" spindle.
61A is 1" shorter than 61B and is like the original height. Both require a 1" spindle.
61D is a 50mm (2") replacement column for most manual adjustable office swivel chair bases.
Requires a 1" spindle.
Requires a 1" spindle.
| Style# |
Description
|
Exposed | $ Cost |
| 61C | 45mm dia. Chrome | 7 1/4" | 41.65 |
| 61A | 45mm dia. Chrome | 3 5/8" | 28.75 |
| 61B | 45mm dia. Chrome | 4 5/8" | 28.75 |
| 61D | 50mm dia. Black | 4" | 19.25 |
| 65 | Adapter-2" to 1 3/4" | 8.70 |
Amount of Exposed column is from top of base leg to top of column including plastic hub liner.
*We cannot predict precise measurement from floor to top of column or to underside of seat due to different base size heights, caster size and type of mechanism or seat plate used.
We can say for normal chairs, #61C will be within a normal table 30" seating height range.
Lounge chair columns #61A and B will both give low Lounge chair heights.
45mm columns will fit 50mm bases using our #65 adapter
Plastic column liners (hub liners) are sold separately
<